The harness is designed for use in combination with a dry bag, or whichever bulky gear that doesn’t require extra layers of cover (sleeping bag, tent, camping mat). Great addition for bike packing trips and adventures!

The Harness is 49cm long and can therefore accomodate large items/bags, however it can also be tightened (via the side release buckles placed on the edges) as much as you’d like, which means it’s extremely versatile and you don’t need to worry if stuff will fit or not.

The main straps (which attach onto the handlebars) are secured via cam buckles, and there’s a third strap underneath to lock the bag at the head tube.

The outer layer is completely made out of inner tubes, and the lining is made out ripstop nylon (colour options are available!). In between the two layers, there’s a layer of flexible plastic sandwiched between two thin layers of foam, to ensure strength and rigidity.

The harness also comes with two extra straps (with clips on each end, that can attach onto the D rings places on the harness panel) that can be used if the bag feels too heavy: attach one clip of each strap to the D rings placed on the harness, make the strap go underneath the bag and over the handlebars, attach the clip on the other end of the strap to the D ring, tighten the strap, done!

Measurements:
49cm in length, and 30cm in width

Simple yet stylish waterproof backpack which opens and closes via a rolltop and side release buckles placed on the sides of the bag.
The backpack roll is very long to allow carrying more items, but it can also be compressed very easily when the bag is not fully loaded. A small pocket is placed on the front for quick-access items, and there’s also mesh pockets on the sides. As well as the mesh pockets, the side panels feature two extendable straps (made out of two layers connected by velcro) that allow a small bike D lock to be carried.
The back panel is reinforced with flexible plastic and padded inserts, so that your back is protected! There’s also a waist belt that has padding around the hip area, and small pockets to carry keys or tiny items.
The shoulder straps are adjustable, they feature an ergonomic shape and are padded with closed cell foam. They feature a chest strap, D rings (for keys, or a portable speaker, or similar clip-on items), and webbing loops.
For added comfort, the bag is shaped in a way that prevents too much weight being carried on the lower back: the front/bottom part is curved around the sides, and the width of the front and back panels is smaller at the bottom and wider at the top.

The inner layer is made out ripstop nylon, and you can choose your own colour (as well as for the thread/stitching).

MEASUREMENTS:
68cm height (fully expanded)
18.5cm depth
24cm width at the bottom, 30cm width at the top

MEASUREMENTS:

22cm height x 17cm width x 6cm depth

FEATURES:

• Lined with ripstop nylon
• Padded back panel
• 5cm/2inches thick shoulder strap
• D ring attachments that allow removing the shoulder strap
• Depth panel made out of inner tubes
• Flat pocket on both the front and the back panel
• Inner mesh pocket
• Inner D ring (to attach keys or other small items)

CUSTOMISATION:

If you’d like a slightly different size than the one of the model, feel free to write down your own measurements in the box below 🙂
Both the outer colour and the inner colour will be of your own choice (check the colour chart to see the options available), or instead you can opt for it to be made fully with inner tubes.

Here you can visually customise our Deliverer Backpack

Please note that if you wish to save a copy of one or multiple variants you’ll need to take a screenshot of the page. 

If you are done with your design and wish to purchase the item, please head over this page and purchase it there! You’re free to add it to the cart and purchase it, however be aware that it doesn’t count as an order by itself!

Thank you!

Here you can visually customise our Bumbag design – we have 3 sizes available (mini, medium, and large) of the same design!

Please note that if you wish to save a copy of one or multiple variants you’ll need to take a screenshot of the page. 

If you are done with your design and wish to purchase the item, please head over this page ! You’re free to add it to the cart and purchase it, however be aware that it doesn’t count as an order by itself!

Thank you!

Here you can visually customise our Messenger bags

Please note that if you wish to save a copy of one or multiple variants you’ll need to take a screenshot of the page. 

If you are done with your design and wish to purchase the item, please head over this page and purchase it there! You’re free to add it to the cart and purchase it, however be aware that it doesn’t count as an order by itself!

Thank you!

Hip bags customiser

Here you can visually customise our Hip bags (both sizes have the same design)

Please note that if you wish to save a copy of one or multiple variants you’ll need to take a screenshot of the page. 

If you are done with your design and wish to purchase the item, please head over this page and purchase one of the two! You’re free to add it to the cart and purchase it, however be aware that it doesn’t count as an order by itself!

Thank you!

The Frontloader – Large handlebar bike bag (around 6-7l)

Here you can visually customise our “Frontloader” handlebar bag

Please note that if you wish to save a copy of one or multiple variants you’ll need to take a screenshot of the page. 

If you are done with your design and wish to purchase the item, please head over this page and purchase it over there! You’re free to add it to the cart and purchase it, however be aware that it doesn’t count as an order by itself!

Thank you!